Stainless Steel Cable Tie Tool Kit
Can't get steel ties tight with pliers? A stainless steel cable tie tool pulls and trims.
✅ Snug ties, no pliers: squeeze to tighten, press to trim close
✅ No sun-cracked plastic: rust-resistant 304 stainless steel ties
✅ Ready for fences, gates, pipes and exhaust wrap: tool + 150 ties
✅ Free tracked shipping on every order, est. 7–15 business days
✅ Change your mind? 30-day returns on unused items
🚚 Order today, estimated delivery Oct 29 – Nov 10 (7–15 business days)
Free tracked shipping
30-day returns on unused items
Secure checkout
This stainless steel cable tie tool pulls each tie tight when you squeeze the handles, then trims the tail close to the head when you press the cutter. Each WAVELAB stainless steel zip tie tool kit pairs the tensioner with 150 ties made of 304 stainless steel (as listed by our supplier).
If you have tried to cinch a steel tie with pliers, you know the problem: the tail is hard to hold while you pull, and the tie ends up loose. This metal zip tie tool kit handles the pull and the cut for you.
Tip: the tool can apply a lot of force, so build tension gradually on delicate items.
Two kits are $142.40 ($71.20 per kit, save 20%) and three kits are $186.90 ($62.30 per kit, save 30%), each a full set for the truck, the barn or a friend.
Kits are sourced from our manufacturing partner in China and shipped free with tracking. Estimated delivery is 7–15 business days. Unused items in original packaging can be returned within 30 days of delivery: email support@wavelabco.com first. Return shipping is paid by the customer unless the item arrived damaged, defective or wrong; in that case, email us within 7 days of delivery with your order number and photos for a replacement or refund. See our Shipping Policy and Refund Policy.
Questions? WAVELAB LLC support aims to reply within 1–2 business days. Pick 1, 2 or 3 kits above and click ADD TO CART. New here? Enter code WELCOME in the cart or at checkout for 10% off your order, once per customer.
Ordering 2 or 3 kits? You get 2 or 3 full sets: 2 tools and 300 ties, or 3 tools and 450 ties.
Not included: gloves, pliers or mounting hardware. Ties are single-use once cut, and cut steel ends can be sharp, so handle them with care.
Shipping is free on every order, with tracking. Kits are sourced from our manufacturing partner in China and shipped to you, with estimated delivery in 7–15 business days. Delivery times are estimates and can be affected by carrier delays, holidays or customs.
Unused items in their original packaging can be returned within 30 days of delivery. Email support@wavelabco.com first with your order number for instructions; items sent back without a return request cannot be accepted. Return shipping is paid by the customer unless the item arrived damaged, defective or wrong.
Damaged, defective or wrong item? Email us within 7 days of delivery with your order number and photos, and we will arrange a replacement or refund. Approved refunds go to your original payment method within 5–10 business days. See our Shipping Policy and Refund Policy.
304 stainless steel ties (as listed by our supplier), not plastic that can crack in the sun
Listed by our supplier as resisting rust, UV, heat and cold
The same tool pulls each tie tight and trims the tail. No pliers needed
On every order, est. 7–15 business days. Sourced from our partner in China
WAVELAB LLC, Fort Collins, CO. Email support@wavelabco.com
The plastic tie on the gate has cracked in the sun again. So you switch to steel, grab the pliers, and the tail slips while the tie sits loose.
This kit fixes that: one tool pulls each tie tight and trims the tail, so the pliers can stay in the drawer.
Ties: 304 stainless steel, 11.8 in (300 mm)
Tool: about 8.2 in (210 mm) long
As listed by our supplier.
Keep a second kit in the truck: next time the fence sags or the header wrap needs ties, it is right there.
✔ Code WELCOME: 10% off your order, once per customer
✔ 30-day returns on unused items
Pick 1, 2 or 3 kits above, each a full set: 1 tool plus 150 ties. Free tracked shipping, estimated 7–15 business days. 30-day returns on unused items. Code WELCOME: 10% off, once per customer.
It comes down to four steps: feed the tie through its buckle, set the tail in the tool, squeeze to tighten, then press the cutter. Try a spare tie or two first. The tool can apply a lot of force, so build tension gradually on delicate items.
Each kit is a full set: 1 tool and 150 ties for $89.00. Two kits are $142.40 ($71.20 per kit, save 20%), handy for a second vehicle or a friend. Three kits are $186.90 ($62.30 per kit, save 30%), one each for the truck, the barn and the garage.
Each kit has 1 tensioning tool, designed for stainless steel cable ties like the ones included, and 150 ties, 11.8 in (300 mm). Not included: gloves, pliers or mounting hardware. Ties are single-use once cut, so check placement before you tighten.
Pliers can manage a tie or two, but a steel tail is hard to hold while you pull. For a fence line, a gate or a full exhaust wrap, the tool pulls each tie tight as you squeeze, and a press of the cutter trims the tail close to the head.
Shipping is free on every order, with tracking. Kits are sourced from our manufacturing partner in China and shipped to you. Estimated delivery is 7–15 business days; carriers, holidays or customs can add time. A tracking number is emailed when it ships.
Damaged, defective or wrong? Email support@wavelabco.com within 7 days of delivery with your order number and photos for a replacement or refund. Unused, in original packaging? Email first to return it within 30 days of delivery; you pay return shipping.
